After turning on your Lenovo laptop hangs on the Lenovo logo screen. What to do if Lenovo won't boot? Read on to find solutions for Lenovo laptop stuck on Lenovo screen. TechVirundhu will provide you a detailed guide in this post.
Lenovo Stuck on Boot Menu/Lenovo Screen
System problems, especially blue screen or stuck on loading screen always appear unexpectedly. No matter what brand of PC you use (Lenovo, Dell, Acer, Asus, HP, etc.), booting problems can occur.
If you are running a Lenovo laptop or desktop then you may be affected by Lenovo laptop stuck on Lenovo screen/Lenovo desktop stuck on Lenovo screen. Here's an example of a Lenovo stuck on the Lenovo screen:
The problem mainly arises due to corrupted system files, any error in BIOS, motherboard problem, software problem etc. Don't panic when running Lenovo stuck in boot menu issue. In this article, you will find some straightforward and useful troubleshooting tips. Continue reading.
Solutions to Lenovo Laptop Stuck on Lenovo Screen
Tip: The following methods apply to all the Lenovo Laptops, including Lenovo Ideapad 320/310, Lenovo T460, Lenovo G500, Lenovo Horizon, and more. If your Lenovo won’t boot and gets stuck on the splash screen, follow these solutions below to fix it.
Fix 1: Unplug All the External Devices and Run a Hard Reset
From your Lenovo laptop/desktop you can first connect all peripherals including USB storage devices, mp3 players, printers, scanners, digital cameras, CD drives and more. These external devices can interfere with the boot process, causing the Lenovo to fail to boot and get stuck on the Lenovo screen.
Next, perform a hard reset. If you're using a desktop, unplug the power cable from the socket and plug it back into power.
If you're using a Lenovo laptop, you should also remove the AC adapter, remove the battery if it's removable, and hold down the power button for at least 30 seconds to turn off the laptop. Connect only the AC adapter and power to the laptop. If Windows can boot, shutdown, reconnect battery and external devices.
Fix 2: Remove a Lenovo DVD Drive
Does your Lenovo laptop have a DVD drive? According to users, removing DVD ROM drive is a possible solution to fix Lenovo laptop stuck on Lenovo screen. It sounds strange, but in some cases it works to fix your problem.
Fix 3: Run Lenovo Diagnostics Tool
Lenovo PCs have a built-in Lenovo Diagnostic tool designed to test and fix problems that may occur with your computer. This tool detects hardware including motherboard, CPU, video, memory, storage (SSD, SATA and SAS) and monitors system health.
Also, they can diagnose and fix your computer problem including Lenovo laptop stuck on Lenovo screen/Lenovo stuck on welcome screen Windows 10/Lenovo desktop stuck on Lenovo screen and many more.
Enter boot menu and press F1/F2/F9/F10/F11/F12 key during boot to find and run Lenovo Diagnostics.
Tip: You can run Lenovo Diagnostics to test your hard drive. If some problems related to the hard drive are detected, you should replace it with a new disk.
Fix 4: Perform Automatic Repair
Automatic repair is another useful method to fix some operating system problems, including Lenovo stuck in the boot menu. Automatic repair requires a Windows repair disc. Then, boot Lenovo computer from the disk and click Repair your computer to enter the recovery interface.
In Windows 10, go to Troubleshoot > Advanced options > Startup repair. Then, follow the on-screen prompts to complete the automatic repair process
Fix 5: Repair the Boot Sector or BCD
Corrupted boot sector or PCD files can cause your Windows system to get stuck in the boot menu. Fix boot sector or pcd in windows to fix lenovo laptop stuck on lenovo screen.
To make this work, you need to run it on the command line. Since Lenovo laptop won't boot to desktop, you need a repair disc to boot the PC, then go to Repair your computer > Advanced options > Command Prompt.
Next, type these commands below and press Enter after each command.
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
Tip: If you get “access is denied” after typing the command bootrec /fixboot
Fix 6: Reset BIOS to Default Settings
If your first boot device isn't a hard drive, your Lenovo laptop might be stuck on the Lenovo screen. Besides, a failed update or a malware attack can corrupt the BIOS, causing the Lenovo to not boot through a stuck loop.
One solution is to reset the BIOS to default settings to get rid of this system problem. Below are the steps to perform this task:
- Restart your Lenovo computer and press the F1 or F2 key to enter the BIOS menu.
- Find Setup Defaults Based on different PCs, the option is different and is usually called Setup Defaults, Factory Default, Reset to Defaults or something similar.
- Select Load Setup Defaults or something similar to reset BIOS.
Fix 7: Disable Lenovo Service Engine in BIOS
On some Lenovo laptops or desktops, if you enable Lenovo Service Engine in BIOS, Lenovo won't boot and Lenovo won't get stuck on splash screen. It's a utility in the BIOS that lets you download a program called OneKey Optimizer that sends non-personally identifiable system data to Lenovo servers.
However, attackers can use the Lenovo Service Engine to perform a buffer overflow attack and attempt to connect to the Lenovo test server. As a result, the problem of Lenovo stuck in the boot menu appears. So, disable Lenovo Service Engine in BIOS.
Step 1: Boot your computer and press F1 or F2 to enter BIOS.
Step 2: Go to the Security tab, find Lenovo Service Engine, and disable it.
Fix 8: Reset Your PC to Factory Settings
What should you do if your Lenovo laptop is stuck on the Lenovo screen even though you have tried all the ways mentioned above? The best option is to reset your Lenovo to factory settings.
If you're running Windows 10, boot your computer from a repair disc, enter the Windows Recovery Environment, and go to Troubleshoot > Restore this PC. Or you can run Lenovo OneKey Recovery to restore the system to its original state.
Fix 9: Reinstall Windows for Lenovo
In addition to Lenovo factory reset, you can choose to reinstall the Windows operating system from an installation disc or USB flash drive. Also, boot your Lenovo PC from the disc or drive, then click Install Now in the Windows Setup interface. Then, follow the on-screen instructions to complete a clean installation of Windows.
If you face DRIVER VERIFIER DMA VIOLATION BSOD issue in your windows 10 / 11 this post will help you to fix it.
Back up Files Before Factory Reset or Reinstallation
As mentioned above, the final solution to not booting with Lenovo screen stuck on Lenovo is to reset the PC to default settings or perform a clean installation of Windows. However, you should be aware that the operation may lead to data loss. So, before doing either of these two tasks, create a backup for your important files.
Backing up files or folders is not a difficult task. But if your Lenovo fails to boot, things get a bit complicated. Fortunately, you can ask MiniTool Shadowmaker for help.
It is a professional PC backup software designed to backup files, folders, Windows systems, disks and partitions. Besides, disk cloning and file synchronization are supported. Essentially, it allows you to create a bootable USB drive or CD/DVD to boot an unbootable PC and perform backup and restore operations.
Step 1: Get MiniTool ShadowMaker Bootable Edition by creating a bootable drive with Media Builder.
Note: Download the installer [1.91 MB], run the installer, and finish the installation process.
Update: New code that offers a 6-month subscription (till September 30, 2024).
When you launch the application for the first time, you will notice the activation window.
Enter the below license code and hit the “Activate” or “Register” button to activate the Pro version.
BBAA5C-7E315B-66246A-EB8BCE
[OR]
497FCA-799ABA-AE3B43-8DCBB1
Step 2: Run the Lenovo PC from the drive and then open MiniTool ShadowMaker.
Step 3: Go to Backup, click Source > Folders and Files to choose files that you want to back up, and then go to Destination to choose a storage path.
Step 4: Click Back up Now to execute file backup.
Recover Data from an Unbootable Lenovo Computer
If the Lenovo laptop is stuck on the Lenovo screen but the problem still appears, the best option is to recover data from the crashed computer. You can use MiniTool Power Data Recovery to do this job.
It is a professional data recovery software for Windows. With this, you can recover data from many situations such as accidental deletion, formatting, partition loss, hard drive damage, system crash, etc. With several clicks, you can easily recover data.
Now, get the full edition of MiniTool Power Data Recovery and then launch it to create a bootable USB drive to boot the crashed Lenovo. Then, start the data recovery.
Download the software (trail version) from the developer page.
11377E-4EC6D5-921CB6-0C371D [OR] E8AB1C-0186E7-7C4624-B8FA8F
Install the program and start it up.
To activate this software, open the app’s main menu and click the “Key” icon, then enter the license code shown below.
Don’t forget to click the “Register” button.
- Go to the main interface of MiniTool Power Data Recovery and then choose your hard drive to scan.
- After a few minutes, this software finishes scanning.
- Check all the items that you want to recover, and click Save.
- Specify a path to save the recovered files.
Important Note:
Is your Lenovo laptop stuck on Lenovo screen? Don't worry, you can try to fix this problem. Try these methods mentioned above if your Lenovo is stuck on splash screen without booting. Also, take steps to keep your files safe – back up files or recover data from an unbootable Lenovo computer.
If you have any suggestions for fixing Lenovo stuck in boot menu or have any questions while using the software, please let us know. You can choose to leave a comment in the following section, We will reply you as soon as possible. If you like to follow us in YouTube just click and Subscribe @TechVirundhu